PRODUCT LINEUP
NAMITEC Engine Oil Additive
G-MAX
Motorsport
Special formulation with maximum graphene nanoparticles for instant torque, power gain, and extra wear protection.
Suitable for turbo, petrol or diesel, 4-8L and above.
G-TECH
Motorcycle
Flagship G-TECH formula enhances your riding experience by instantly improving engine smoothness and throttle response.
Suitable for 2/4T, 1-2L and above, wet/dry clutches.
G-TECH
Automotive
Flagship G-TECH formula enhances driving pleasure by instantly improving engine smoothness and throttle response.
Suitable for hybrid, petrol or diesel, 3-5L and above.
HEAVY DUTY
Commercial Vehicles
For larger engines with lower RPMs and longer service intervals, it provides wear protection and lowers operating temperature.
Suitable for petrol or diesel, 4-8L and above.
Instant Torque and Power Gain
Say goodbye to sluggish pickup and hello to an adrenaline-packed drive every time you hit the road! NAMITEC G-Max has undergone intense dyno power run tests, dancing with performance vehicles like Mercedes-GT AMG, Toyota Supra, BMW 135i, Mitsubishi Evo and more.
Dyno power runs revealed an impressive up to 56% improvement in Torque & Turbo Spool Rate at the crucial Low to Mid RPM Range – precisely where you need it during your everyday drives.
Buckle up for an exhilarating journey and let your engine roar with newfound power and torque instantly!
Instant Torque and Power Gain
Say goodbye to sluggish pickup and hello to an adrenaline-packed drive every time you hit the road! NAMITEC G-Max has undergone intense dyno power run tests, dancing with performance vehicles like Mercedes-GT AMG, Toyota Supra, BMW 135i, Mitsubishi Evo and more.
Dyno power runs revealed an impressive up to 56% improvement in Torque & Turbo Spool Rate at the crucial Low to Mid RPM Range – precisely where you need it during your everyday drives.
Buckle up for an exhilarating journey and let your engine roar with newfound power and torque instantly!
Ultimate Engine Smoothness
NAMITEC graphene nanotechnology minimizes friction, giving an immediate boost to throttle response. Your car won’t just move; it’ll glide effortlessly, making every drive a joyride.
NAMITEC G-Max proves it by reducing the coefficient of friction (COF) by a staggering 13.9%, while the G-Tech isn’t far behind, boasting a 6.1% COF reduction. And this isn’t just marketing talk – ASTM D4172 lab tests back it up.
Silence the Rumble, Cool the Heat:
Say goodbye to annoying engine vibrations and unnecessary noise. NAMITEC doesn’t just make your engine smoother; it makes it quieter. Plus, the reduced friction means lower temperatures, keeping your engine cool even when the drive heats up.
A smoother engine is a happier engine! Embrace the smooth revolution and enjoy a better drive today.
Ultimate Engine Smoothness
NAMITEC graphene nanotechnology minimizes friction, giving an immediate boost to throttle response. Your car won’t just move; it’ll glide effortlessly, making every drive a joyride.
NAMITEC G-Max proves it by reducing the coefficient of friction (COF) by a staggering 13.9%, while the G-Tech isn’t far behind, boasting a 6.1% COF reduction. And this isn’t just marketing talk – ASTM D4172 lab tests back it up.
Silence the Rumble, Cool the Heat:
Say goodbye to annoying engine vibrations and unnecessary noise. NAMITEC doesn’t just make your engine smoother; it makes it quieter. Plus, the reduced friction means lower temperatures, keeping your engine cool even when the drive heats up.
A smoother engine is a happier engine! Embrace the smooth revolution and enjoy a better drive today.
Proven Engine Wear Protection
NAMITEC doesn’t just claim engine wear protection, we prove it through rigorous ASTM D4172 testing – the gold standard in determining wear preventive properties.
NAMITEC G-Max elevates engine wear protection by up to 14.5%, ensuring your engine stays in peak condition, ready to conquer miles.
For everyday drivers, NAMITEC G-Tech provides a solid 10.4% improvement.
Choose NAMITEC for a protective shield that goes beyond ordinary lubrication, because your engine deserves the best defense!
Trust the science – Armor Your Engine with NAMITEC's Scientific Shield!
Proven Engine Wear Protection
NAMITEC doesn’t just claim engine wear protection, we prove it through rigorous ASTM D4172 testing – the gold standard in determining wear preventive properties.
NAMITEC G-Max elevates engine wear protection by up to 14.5%, ensuring your engine stays in peak condition, ready to conquer miles.
For everyday drivers, NAMITEC G-Tech provides a solid 10.4% improvement.
Choose NAMITEC for a protective shield that goes beyond ordinary lubrication, because your engine deserves the best defense!
Trust the science – Armor Your Engine with NAMITEC's Scientific Shield!
The 4-Ball wear (ASTM D4172) test is a technical standard published by American Society for Testing and Materials. It is used to determine the relative wear preventive properties of lubricating fluids.
Three (12.7mm diameter) steel balls are clamped together and covered with the test lubricant to be evaluated. A fourth steel ball is pressed downward (from the top) with a force of 40 kgf (392 N) for a three-point contact. The temperature of the lubricating specimen is regulated at 75°C and the top ball is rotated at 1200 rpm for 60 minutes.
Average size of the scar diameters worn on the three lower clamped balls are measured. The size of the scar (the smaller the better) indicates the level of wear protection the lubricant provides.
The coefficient of friction data is also collected throughout the 60 minute test with the average being reported at the end of the test.
ACCREDITED RESEARCH AND LABORATORY TESTS
Guaranteed Safe to Use
NAMITEC Graphene Nano-particles is ~ 0.03 -0.2μm
Up to 100 times smaller than typical oil filter specifications
Reduced Risk of Mechanical Damage Due to Foaming
23% reduction in foaming volume
Maintain Your Base Oil Chemical Characteristics
Low dosage formula ensure minimum change to base oil viscosity index for best performance
4% Reduction in Carbon Emissions & Fuel Consumption
Imagine your car becoming a lean, mean, fuel-saving machine, all while Mother Earth breathes a sigh of relief?
TUV Singapore (*UN-R101) validated a 4% reduction in carbon emissions and fuel consumption for NAMITEC. Your car becomes an environmental superhero, and you get to be the savvy, eco-conscious driver with a fatter wallet. Win-win, right? So, why settle for anything less when you can drive smart and save the planet (and some moolah) at the same time!
*UN-R101 lab test report is a standard adopted by major countries globally, including Singapore, for importation of automotive vehicles.
It turns out, your vehicle’s CO2 emissions are like the engine’s way of sending a postcard to Mother Nature.
So, why not join the eco-squad and make a difference – it’s time to enjoy a better drive and a lighter carbon footprint. Let’s drive change together!
4% Reduction in Carbon Emissions & Fuel Consumption
Imagine your car becoming a lean, mean, fuel-saving machine, all while Mother Earth breathes a sigh of relief?
TUV Singapore (*UN-R101) validated a 4% reduction in carbon emissions and fuel consumption for NAMITEC. Your car becomes an environmental superhero, and you get to be the savvy, eco-conscious driver with a fatter wallet.
Win-win, right? So, why settle for anything less when you can drive smart and save the planet (and some moolah) at the same time!
*UN-R101 lab test report is a standard adopted by major countries globally, including Singapore, for importation of automotive vehicles.
It turns out, your vehicle’s CO2 emissions are like the engine’s way of sending a postcard to Mother Nature.
So, why not join the eco-squad and make a difference – it’s time to enjoy a better drive and a lighter carbon footprint. Let’s drive change together!
FIND OUT MORE
Frequently Asked Questions
Graphene by itself is insoluble. (ie. It does not dissolve in liquid.)
The working principles of NAMITEC is solid lubrication. Well dispersed high-performance graphene (ultra-low thickness of 1nm) enter tribo-interfaces easily and form a tribol protective layer film.
Low shear strength of graphene enables a lower co-efficient of friction, allowing moving parts to slide past each other more easily while high mechanical strength offers wear and tear protection at the same time.
NAMITEC is formulated with the fundamental principle to minimise changes in the characteristics of the users’ engine oil. The basic formulation consists of minimal chemical additive elements. This is one of the core reasons why our dosage is so low.
NAMITEC formulation does not seek to alter any of your engine oil parameters such as viscosity, forming and rate of oxidation. A good rule of thumb is to use a good engine oil with NAMITEC.
NAMITEC uses high purity graphene which are antioxidant by nature. Graphene by itself does not contain and release oxygen which facilitate the oxidation process in the formation of sludge.
In-house engine oil filter analysis revealed no graphene content caught in the filter. (ie. Graphene does not agglomerate into bigger particles and get caught in the filter.)
Lastly, high quality graphene will not break down easily. As an example, it will take approx. 700-800 Degree Celsius of heat to break down the properties of our graphene.
Most of NAMITEC would be ejected during oil change.
Graphene has a very stable structure. It will not react and bond with other chemical groups easily. Graphene will fill the micro-gaps of the engine wall during the engine oil circulation process and will not bond to the engine wall.
The safety datasheet (SDS) can be downloaded by clicking on the link: NAMITEC Safety Data Sheet.
PROVEN RESULTS